The Characterization of a Biodegradable Mg Alloy after Powder Bed Fusion with Laser Beam/Metal Processing for Custom Shaped Implants.

A new Mg-Zn-Zr-Ca alloy in a powder state, intended to be used for custom shaped implants, was obtained via a mechanical alloying method from pure elemental powder. Further, the obtained powder alloy was processed by a PBF-LB/M (powder bed fusion with laser beam/of metal) procedure to obtain additive manufactured samples for small biodegradable implants. A series of microstructural, mechanical and corrosion analyses were performed. The SEM (scanning electron microscopy) analysis of the powder alloy revealed a good dimensional homogeneity, with a uniform colour, no agglutination and almost rounded particles, suitable for the powder bed fusion procedure. Further, the PBF-LB/M samples revealed a robust and unbreakable morphology, with a suitable porosity (that can reproduce that of cortical bone) and without an undesirable balling effect. The tested Young's modulus of the PBF-LB/M samples, which was 42 GPa, is close to that of cortical bone, 30 GPa. The corrosion tests that were performed in PBS (Phosphate-buffered saline) solution, with three different pH values, show that the corrosion parameters have a satisfactory evolution comparative to the commercial ZK 60 alloy.

The Use of Allograft Bone in the Lateral Approach of Sinus Floor Elevation: A Systematic Review of Clinical Studies.

Background and Objectives: The aim of this systematic review was to assess the efficiency of using allografts for sinus lift. Materials and Methods: This systematic review was written under the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and recommendation of the Cochrane Handbook for Systematic Reviews of Interventions. Three electronic databases were screened until October 2023. The risk of bias was assessed according to the Strengthening the Reporting of Observational studies in Epidemiology (STROBE) guidelines. Statistical analysis was performed for median bone volume and implant survival rate. Results: From 321 articles retrieved, 7 articles were included in this review. A comparison between freeze-dried bone allograft (FDBA) and deproteinized bovine bone (DBB) for mean bone volume indicated a weighted mean difference (WMD) of -0.17 [-0.69, 0.36] (95% confidence interval (CI)), p = 0.53. For implant survival rate, a comparison was made between FDBA and autogenous bone indicating a risk ratio (RR) of 1.00 [0.96, 1.05] (95% CI), p = 1.00. Conclusions: The available evidence suggested that allograft bone can be used in sinus lift procedures. The results obtained are insufficient to compare with other types of bone graft, requiring a longer follow-up time. Future clinical trials are needed in order to evaluate the advantages of using allograft bone.

Biomineralization ability of an experimental bioceramic endodontic sealer based on nanoparticles of calcium silicates.

Background and aims: The ultimate goal of endodontic therapy is to prevent periradicular disease or to promote the healing of the periradicular lesions. The use of nontoxic, biocompatible, and bioactive materials designed for root canal obturation is preferred due to their increased potential to induce healing and bone regeneration, thereby restoring the functionality of the tooth and the adjacent tissues. The aim of this study was to analyze the biomineralization ability of an experimental endodontic sealer based on synthesized nanoparticles of calcium silicates. Methods: Six plastic moulds were filled with the freshly prepared experimental endodontic sealer and kept for 3 days at room temperature in a moist environment. After hardening, four samples were subsequently immersed in simulated body fluid (SBF) and introduced in incubator at 37°C and 100% relative humidity; two of them were kept for 7 days and the other two for 14 days. Two samples were not immersed in SBF and were used for comparison. The biomineralization potential was assessed by XRPD, SEM and EDS analysis. Results: Following immersion in SBF, XRPD analysis identified apatite crystals for experimental material both after 7 and 14 days. SEM images displayed the specific microstructure for bioceramic materials alongside with the presence of apatite crystals on their surface. EDS identified the presence of phosphorus and calcium elements, underlining the biomineralization potential of the experimental material. Conclusion: Interaction between experimental material and SBF succeeded in inducing precipitation of apatite on its surface, evidenced by XRDP, SEM and EDS analysis.

Biodegradable Magnesium Alloys for Personalised Temporary Implants.

The objective of this experimental work was to examine and characterise the route for obtaining demonstrative temporary biodegradable personalised implants from the Mg alloy Mg-10Zn-0.5Zr-0.8Ca (wt.%). This studied Mg alloy was obtained in its powder state using the mechanical alloying method, with shape and size characteristics suitable for ensuing 3D additive manufacturing using the SLM (selective laser melting) procedure. The SLM procedure was applied to various processing parameters. All obtained samples were characterised microstructurally (using XRD-X-ray diffraction, and SEM-scanning electron microscopy); mechanically, by applying a compression test; and, finally, from a corrosion resistance viewpoint. Using the optimal test processing parameters, a few demonstrative temporary implants of small dimensions were made via the SLM method. Our conclusion is that mechanical alloying combined with SLM processing has good potential to manage 3D additive manufacturing for personalised temporary biodegradable implants of magnesium alloys. The compression tests show results closer to those of human bones compared to other potential metallic alloys. The applied corrosion test shows result comparable with that of the commercial magnesium alloy ZK60.

Morphology, Cytotoxicity, and Antimicrobial Activity of Electrospun Polycaprolactone Biomembranes with Gentamicin and Nano-Hydroxyapatite.

The aim of this research is to develop new nanocomposite membranes (NMs) for guided bone regeneration from polycaprolactone (PCL), with different concentrations of gentamicin sulfate (GEN) and nano-hydroxyapatite (nHAP) through electrospinning. The obtained NMs were characterized for structure through SEM and AFM, which revealed the influence of GEN and nHAP on the fiber diameter. The addition of GEN lowered the fiber diameter, and the addition of nHAP increased the diameter of the fibers. The NMs demonstrated antibacterial properties against P. aeruginosa, S. aureus, B. cereus, and E. coli depending on the drug concentration, while being negligibly affected by the nHAP content. NM cytotoxicity assessment, performed once using the MTT assay, revealed no cytotoxicity. The developed NMs could be a promising alternative for guided bone regeneration.

Evaluation of Bond Strength of Four Different Root Canal Sealers.

The purposes of the study were to evaluate the influence of the sealer's chemical composition on the interfacial strength between root canal dentin and root filling material, for two different classes of endodontic sealers, and to assess their failure modes. Methods: Forty extracted single-rooted teeth were randomly divided into four groups using the following endodontic sealers: RealSeal SE and Resilon (RSSE); EndoSequence BC sealer and BC Point (EBCS); Endoseal MTA and gutta-percha (EDS); Bioroot RCS and gutta-percha (BRS). Teeth were embedded in acrylic resin, and the roots were sectioned horizontally into 1 mm slices. For each slice, the perimeter was measured. A push-out test was performed using an Instron universal testing machine. For each sample, bond strength was calculated. Specimens were examined by SEM investigation in order to analyze the dentin−sealer−core interface. Results were assessed using analysis of variance (ANOVA) and Tukey and Bonferroni test. Results: Statistical analysis revealed that EDS and gutta-percha had significantly higher resistance to dislodgement compared to the other three groups (p < 0.05). EBCS and BC Point showed significantly greater push-out bond strength values compared to RSSE and Resilon (p < 0.05). Conclusions: Bioceramic endodontic sealers showed a higher bond strength to root dentin than methacrylate resin-based endodontic sealer.

Laser Powder Bed Fusion Applied to a New Biodegradable Mg-Zn-Zr-Ca Alloy.

The aim of the present paper is to apply the laser powder bed fusion process to a new biodegradable Mg-Zn-Zr-Ca alloy powder prepared via a mechanical alloying method from powder pure components. This additive manufacturing method is expected to allow for the obtaining of high biomechanical and biochemical performance. Various processing parameters for laser powder bed fusion are tested, with a special focus on laser energy density-E [J/mm3]-which is calculated for all experiment variants, and which represents an important processing parameter, dependent upon all the rest. The goal of all the trials is to find the most efficient schema for the production of small biodegradable parts for the medical domain, meaning the selection of optimal processing parameters. An important observation is that the most robust and homogeneous samples without cracks are obtained for lower values of the E, around 100 J/mm3. Thus, the most performant samples are analyzed by scanning electron microscopy, X-ray diffraction and by compression mechanical test.

The World of Oral Cancer and Its Risk Factors Viewed from the Aspect of MicroRNA Expression Patterns.

Oral cancer is one of the leading causes of death worldwide, with a reported 5-year survival rate of around 50% after treatment. Epigenetic modifications are considered to have a key role in oral carcinogenesis due to histone modifications, aberrant DNA methylation, and altered expression of miRNAs. MicroRNAs (miRNAs) are small non-coding RNAs that have a key role in cancer development by regulating signaling pathways involved in carcinogenesis. MiRNA deregulation identified in oral cancer has led to the idea of using them as potential biomarkers for early diagnosis, prognosis, and the development of novel therapeutic strategies. In recent years, a key role has been observed for risk factors in preventing and treating this malignancy. The purpose of this review is to summarize the recent knowledge about the altered mechanisms of oral cancer due to risk factors and the role of miRNAs in these mechanisms.

High-Frequency Ultrasound Assessment of Skin and Oral Mucosa in Metabolic Syndrome Patients-A Cross-Sectional Study.

BACKGROUND: Exogenous factors (such as sun exposure, smoking habits, and diet) and endogenous (inflammatory status, general diseases) have a direct influence on skin and soft tissue characteristics. The study's objective was to assess the impact of metabolic syndrome (MS) on characteristics of skin layers in sun-exposed and non-exposed maxillofacial tissues evaluated by high-frequency ultrasound (HFU), as a potential diagnosis and monitoring tool for the aging process. MATERIAL AND METHODS: The present study included 102 subjects (24 with MS; 78 without MS). Anthropometric parameters and disease history were recorded, and blood samples were harvested in order to assess biochemical parameters of MS. Sun-exposed skin (zygomatic region) and non-exposed oral mucosa of the lower lip were assessed using HFU (DUB® cutis, Taberna Pro Medicum) with a 22 MHz probe. RESULTS: Patients with cardiac disease had significantly lower values for epidermis density (p = 0.002). Gender was independently linked to the aged dermis depth (p < 0.001), aged dermis no. of px (pixels) (p < 0.001), dermis depth (p < 0.001), dermis no. of px (p < 0.001), and subcutaneous tissue density (p < 0.001). Patients with MS had thinner epidermis (p = 0.008) and thinner aged dermis (p = 0.037) when compared to non-MS subjects. CONCLUSION: Patients with MS had thinner epidermis and a lower epidermis number of pixels in sun-exposed skin. Women had lower epidermis density and thicker dermis in sun-exposed skin. Our study showed that HFU, as a non-invasive investigation approach, is useful to diagnose and monitor the aging process in skin and oral mucosa, correlated with skin phenotype pathological conditions.

Electrospun Membranes Based on Polycaprolactone, Nano-Hydroxyapatite and Metronidazole.

The aim of this research was to develop new electrospun membranes (EMs) based on polycaprolactone (PCL) with or without metronidazole (MET)/nano-hydroxyapatite (nHAP) content. New nHAP with a mean diameter of 34 nm in length was synthesized. X-ray diffraction (XRD) and attenuated total reflectance Fourier transform infrared spectroscopy (FTIR-ATR) were used for structural characterization of precursors and EMs. The highest mechanical properties (the force at maximum load, Young's modulus and tensile strength) were found for the PCL membranes, and these properties decreased for the other samples in the following order: 95% PCL + 5% nHAP > 80% PCL + 20% MET > 75% PCL + 5% nHAP + 20% MET. The stiffness increased with the addition of 5 wt.% nHAP. The SEM images of EMs showed randomly oriented bead-free fibers that generated a porous structure with interconnected macropores. The fiber diameter showed values between 2 and 16 µm. The fiber diameter increased with the addition of nHAP filler and decreased when MET was added. New EMs with nHAP and MET could be promising materials for guided bone regeneration or tissue engineering.

Platelet rich fibrin as a gingival tissue regeneration enhancer.

Tissue regenerative procedures aim to enhance regeneration of altered tissue. Extensive research has been carried out in this area and all proposed procedures present limitations. In this context the area of platelet-rich fibrin (PRF) research has gained tremendous awareness in the latest years. PRF is a low-cost regenerative modality that facilitates soft tissue regeneration derived from 100% autologous sources. It forms a fibrin mesh that liberates growth factors in a slow and prolonged manner and also contains supra-physiological concentrations of leukocytes. Reports from the literature have suggested that these leukocyte-rich blood-preparations are capable of improving wound healing, diminishing post-operative pain, and additionally minimizing the risk of infection. In our article we present the first clinical case where PRF was used as a wound healing accelerator of gingival lesions in a chemical soft tissue burn after teeth whitening.

Oral appliance therapy in obstructive sleep apnea and snoring - systematic review and new directions of development.

Objective: Oral appliance therapy is a non-invasive treatment that offers a wide variety of oral devices for the treatment of obstructive sleep apnea (OSA). The present review focuses on the effectiveness of mandibular advancement devices for the treatment of OSA.Methods: A systematic review based on the PRISMA checklist was carried out. A detailed electronic database search was conducted using "Obstructive sleep apnea" AND "Oral appliance" AND "Dentistry" as keywords.Results: The initial search in the electronic databases resulted in a total of 262 papers. After the title and abstract analysis and full-text review, the number of eligible papers was reduced to 15.Conclusion: The mandibular advancement device is an effective treatment, improving the Apnea Hypopnea Index and the symptoms of patients with OSA in 92% of the subjects from all the investigated studies. The future may include the integration of a biosensor for the diagnosis and follow-up.Abbreviations: OSA: Obstructive sleep apnea; MADs: Mandibular advancement devices; CPAP: Continuous positive airway pressure; OAT: Oral appliance therapy; MRD: Mandibular repositioning devices; MAS: Mandibular advancement splints; MAA: Mandibular advancement appliances; OA: Oral appliances; AASM: American Academy of Sleep Medicine; AHI: Apnea-hypopnea index; EEG: Sleep-related breathing disorder SRBD; Electroencephalogram; EOG: Electrooculogram; ECG: Electrocardiogram; QOL: Quality of life; TMJ: Temporomandibular joint.

Impact of COVID-19 on Dental Emergency Services in Cluj-Napoca Metropolitan Area: A Cross-Sectional Study.

This study aimed to assess dental care needs in Cluj region during the State of Emergency, declared due to the COVID-19 pandemic, compared to the same period of the year 2019. A descriptive retrospective analysis was conducted, which retrieved patients seeking emergency dental services at the Emergency Department of County General Hospital and "Iuliu Hațieganu" University of Medicine and Pharmacy, Cluj-Napoca, Romania, the only dental service available in April 2020. Recorded data cover the month of April 2020 and is compared with the same period of 2019. During April 2020, 724 patients received dental care, whereas only 160 patients were treated in April 2019 in the same facility. The number of patients with acute apical periodontitis, abscess, and acute pulpitis was significantly higher in 2020. The percentage of patients receiving sedative filling for the treatment of acute pulpitis in 2020 was significantly higher than in 2019, while the proportion of patients receiving pulpectomy was higher in 2019. The percentage of patients receiving endodontic drainage for the treatment of acute periapical periodontitis in 2020 was higher. This study demonstrates that the COVID-19 pandemic impacted the use of medical care services and could further impact the oral health and quality of life of patients.

Influence of Filler Loading on the Mechanical Properties of Flowable Resin Composites.

The aim of this study was to evaluate the correlation between the percent of inorganic filler by weight (wt. %) and by volume (vol. %) of 11 flowable resin composites (FRCs) and their mechanical properties. To establish the correlation, the quantity of inorganic filler was determined by combustion and shape/size analyzed by SEM images. The compressive strength (CS), flexural strength (FS), and flexural modulus (FM) were determined. The CS values were between 182.87-310.38 MPa, the FS values ranged between 59.59 and 96.95 MPa, and the FM values were between 2.34 and 6.23 GPa. The percentage of inorganic filler registered values situated between 52.25 and 69.64 wt. % and 35.35 and 53.50 vol. %. There was a very good correlation between CS, FS, and FM vs. the inorganic filler by wt. % and vol. %. (R2 = 0.8899-0.9483). The highest regression was obtained for the FM values vs. vol. %. SEM images of the tested FRCs showed hybrid inorganic filler for Filtek Supreme XT (A3) and StarFlow (A2) and a homogeneous type of inorganic filler for the other investigated materials. All of the FS values were above 50 MPa, the ISO 4049/2019 limit for FRCs.

Periodontal disease might be a risk factor for graft versus host disease. A systematic review.

PURPOSE: The aim of this systematic review was to determine a potential association between periodontal disease and graft versus host disease (GVHD). DESIGN: PubMed, Scopus and Web of Science databases were searched to identify all relevant articles. The eligibility criteria were prospective, retrospective, cross-sectional, cohort, case-control studies and interventional studies that assessed periodontal parameters in GVHD adults' patients. RESULTS: Seven studies, published between 2000 and 2018, were eligible. The aggravation of periodontal tissues is due to inadequate oral hygiene, dental plaque, decays, gum recession, retained roots, tooth loss, periodontally infected teeth. Several studies have indicated that periodontitis treatment performed before transplantation showed the reduction of gingival inflammation and maintenance of periodontal health. CONCLUSIONS: Periodontitis might be a risk factor for GVHD. However, due to the limited number of studies included in the review and their heterogeneity, more data are needed to sustain the correlation between periodontitis and GVHD.

Evaluation of the outcome of various laser therapy applications in root canal disinfection: A systematic review.

BACKGROUND: Any successful endodontic therapy requires elimination of the endodontic biofilms through meticulous root canal disinfection methods. Sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA) are the most common effective irrigants, in removing smear-layer from the coronal and middle thirds of the dental canals but reduced considerably towards the apical one third. In recent years, newly alternative treatment modalities have been proposed, including high-power lasers and antimicrobial photodynamic therapy (aPDT). Our work was conducted to evalaute the outcome of root canal disinfection in relation to the efficacy of various treatment modalities. Furthermore, every effort was made to present an overview of the aPDT outcomes, as a model for this application, and to propose laser parameters protocol with positive results. METHODS: The electronic databases PubMed was searched from January 2013- January 2019. Our inclusive criteria based on laser therapy applications, as a model for root canal disinfection. The search terms utilised various combinations as follows: photodynamic therapy or antimicrobial photodynamic therapy or photoactivated disinfection or light activated disinfection or laser activated disinfection or laser therapy, and endodontic. RESULTS: The results of this systematic review concluded that the effectiveness of aPDT and various laser wavelengths protocols, in removing endodontic biofilms from infected root canals, remains unattainable. CONCLUSIONS: Study concluded that the combination of aPDT with antimicrobial irrigants could provide a synergetic effect. However, due to the heterogeneity of the selected studies and their limitations, in terms of lack of standardised protocol or discrepancy in the methodology, authors suggest further validated approaches to achieve optimal outcomes.

State of the art regarding anticoagulant and thrombolytic therapy in dental procedures.

Patients with anticoagulant therapy have a high thromboembolic risk. Due to the rich oro-maxillofacial vasculature and the fact that some dental procedures may cause a bleeding, the physician should be able to correlate this risk with the hemorrhagic risk. Dental procedures are a trigger for psychic stress. One of the most important changes in acute stress is in cardiovascular system. In healthy patients, these changes are reversible and have no significant consequences, but in patients with cardiovascular diseases, the response to the catecholamine stress can cause organic lesions resulting in an acute myocardial infarction or stroke. This review explores in a concise manner the biochemical changes concerning anticoagulation and thrombolytic treatment in dental procedures.

The impact of proton pump inhibitors on bone regeneration and implant osseointegration.

Proton pump inhibitors (PPIs) have become known for the treatment of gastric-acid related disorders. Similar to any other drugs, PPIs have possible adverse reactions, being associated with bone fractures, infections, kidney disease, mineral deficiency, dementia, and pneumonia. Multiple analyses have stated that PPIs therapy may affect bone regeneration and osseointegration process, causing an increased risk of bone fracture, deterioration of bone metabolism and impaired bone healing. In this review, we emphasized the current literature regarding the influence of proton pump inhibitors in the bone regeneration process. Results from the studies suggest a link between PPIs intake and bone regeneration, but several concerns are raised regarding inadequate recipient bone, surgical trauma, limitations on the titanium surface, comorbidities or interference with other pharmacological agents. Further studies are needed to determine whether the impaired bone regeneration process is due to PPI or coexisting factors.

Atelo-collagen type I bovine bone substitute and membrane in guided bone regeneration: a series of clinical cases and histopathological assessments.

Absorbable atelo-collagen type 1 represents a new approach for guided bone regeneration with several reported advantages such as: osteoblast attachment, proliferation, mineralization potential, absorption of growth factors and inhibition of bacterial pathogen colonization. The aim of this study was to assess the clinical, radiological (preoperative width, re-entry width, gain), Periotest measurements and histologic benefits of atelo-collagen-derived bovine bone grafts (ImploBone) in combination with an atelo-collagen type I barrier membrane (ImploSorb) for guided bone regeneration (GBR) of atrophic alveolar crest in thirteen patients. Eleven patients underwent simultaneous GBR with implant insertion, two had initial GBR procedure followed by implant placement after 6 months of healing. Ridge augmentation was performed using an atelo-collagen membrane (ImploSorb, Bioimplon, Germany) and a combination of 50% ABBM (ImploBone, granule size 0.5-1mm, BioImplon Germany) mixed with 50% autologous bone. It was found that simultaneous GBR with implant placement resulted in a 35% gain at bone defect level (preoperative width 5.03±1.25 mm, re-entry width 6.81±0.98 mm, gain 1.78±1.71 mm). Implant placement performed in a 2 stage surgery 6 months following GBR was linked with a 63,9% gain at bone defect level (preoperative width 3.79±1.10 mm, re-entry width 6.22±1.41 mm, gain 2.43±1.43 mm). The total gain in both groups was 41,9% utilizing these novel biomaterials (preoperative width 4.68±1.32 mm, re-entry width 6.65±1.12 mm, gain 1.96±1.64 mm). This case series study presents a protocol where GBR can be performed either simultaneously to implant placement or delayed with this innovative biomaterial to favor bone regrowth. Future randomized controlled clinical trials are needed to further validate the bone-promoting potential of atelo-collagen-based biomaterials for bone regeneration.

Saliva, a Magic Biofluid Available for Multilevel Assessment and a Mirror of General Health-A Systematic Review.

BACKGROUND: Saliva has been recently proposed as an alternative to classic biofluid analyses due to both availability and reliability regarding the evaluation of various biomarkers. Biosensors have been designed for the assessment of a wide spectrum of compounds, aiding in the screening, diagnosis, and monitoring of pathologies and treatment efficiency. This literature review aims to present the development in the biosensors research and their utility using salivary assessment. METHODS: a comprehensive literature search has been conducted in the PubMed database, using the keywords "saliva" and "sensor". A two-step paper selection algorithm was devised and applied. RESULTS: The 49 papers selected for the present review focused on assessing the salivary biomarkers used in general diseases, oral pathologies, and pharmacology. The biosensors proved to be reliable tools for measuring the salivary levels of biochemical metabolic compounds such as glucose, proteinases and proteins, heavy metals and various chemical compounds, microorganisms, oncology markers, drugs, and neurotransmitters. CONCLUSIONS: Saliva is a biofluid with a significant clinical applicability for the evaluation and monitoring of a patient's general health. Biosensors designed for assessing a wide range of salivary biomarkers are emerging as promising diagnostic or screening tools for improving the patients' quality of life.